Self-regulating properties – power will adjust to prevailing conditions with ~10x variation in output
High reliability with wire-wound products
Special shapes suit customer design
● Temperature Sensors
Precision temperature measurement of in-flight instrumentation and climate control.
High reliability
Excellent long-term stability
Multiple rugged configurations available
● Pressure Sensors
Used in instrumentation for airspeed indication and during flight test for aerodynamic measurements.
Low long-term drift
High stability and repeatability
● Ultra Low Pressure Sensors
Used in instrumentation for barometric pressure/weather monitoring.
Calibrated to –40°C to 125°C
High stability and repeatability
Digital output: 14bit or 18bit
● Tilt Sensors
Used in instrumentation for barometric pressure/weather monitoring.
Analog and CAN output
Dual axis combined gyroscope and accelerometer
Fully sealed (IP69K) for use in harsh environments
Operating temperature from -40°C to +85°C
This will close in 0 seconds
Comm Aerospace - Fuel Systems
Fuel Systems Applications
● Pressure Sensors ● Gas Detection Sensors ● Ultrasonic Fluid Level Sensors ● Position Sensors
● Pressure Sensors
Measures fluid levels within the fuel system.
Long-term stability
High accuracy and repeatability
● Gas Detection Sensors
Detects the presence of certain gases that indicate fuel leakage.
0 to 100% LEL
Approved EX-d
Mechanically robust
● Position Sensors
Provides liquid level feedback within the fuel system.
Sealed for harsh environments
Selectable working principle: Hall effect/reed switch
Robust and reliable modular design
This will close in 0 seconds
Comm Aerospace - Engine
Engine Applications
● Speed & Position Sensors ● Ultrasonic Fluid Level Sensors ● Vibration Monitoring Sensors ● Current Sensors
● Speed & Position Sensors
Monitors wheel speed, engine speed and position of the engine.
Variable reluctance and active hall effect or magneto resistive sensors
Zero speed, large air gap capability
Packaged to resist harsh environments
Customizable options
● Ultrasonic Fluid Level Sensors
Continuously monitors liquid levels within tank or reservoir, including fuel, coolant and hydraulic fluids.
High accuracy
Robust, non-contact sensing
Slosh filtering
Customizable options
● Vibration Sensors
Continuously monitoring engine balance.
Early fault detection
Compact sensor placement
High sensitivity and extremely low noise
Suitable for temperatures from -400° F to +1400°F
● Pressure Sensors
Combustion instability measurement.
Fast repsonse time
High accuracy
Long-term stability and repeatability
Suitable for temperatures from -400° F to +1400°F
● Current Sensors
Based on open-loop Hall-effect and coreless TMR technology.
Busbar, integrated busbar, flanged and wire mounting
Simple or redundant analog ratiometric output
Measured values of up to ±4,000A
This will close in 0 seconds
Comm Aerospace - Wind Tunnel Testing
Wind Tunnel Testing Applications
● Pressure Sensors ● Accelerometers ● Microphones
Click on the logos to explore company sites.
● Pressure Sensors
Aerodynamic testing
Piezoresistive pressure sensors for static accuracy
Piezoelectric pressure sensors for turbulent and shock waves
● Accelerometers
Shock and vibration of wind tunnel models
● Microphones
Aero-acoustic testing
External surface noise on aircraft
This will close in 0 seconds
Comm Aerospace - Flight & Ground Testing
Flight & Ground Testing Applications
● Pressure Sensors ● Accelerometers ● Microphones
Click on the logos to explore company sites.
● Pressure Sensors
Aerodynamic testing
Piezoresistive pressure sensors for static accuracy
Piezoelectric pressure sensors for turbulent and shock waves
● Accelerometers
Shock and vibration of aircraft and helicopters
● Microphones
Aero-acoustic testing
External surface noise on aircraft
Cabin noise testing
This will close in 0 seconds
Electrification - Battery Pack
Battery Pack Applications
Consists of a cluster of individual batteries that serve as the primary fuel source of the vehicle, replacing hydrocarbon fuels used in conventional ICE automobiles.
● Temperature Sensors ● Current Sensors ● Acceleration Sensors
● Temperature Sensors
Measure and monitor surface temperature of the many batteries within the battery cell, which is critical to preserving the chemistry of the battery.
Single point temperature sensors
Rigid and flexible types
Custom sensor packaging
● Current Sensors
Measure and monitor current flowing to and from battery.
Hall effect, open loop current sensor
Busbar or wire mounting
Analog ratiometric output, 1 and 2 channels
● Water Detection Sensors
Detects moisture leakage and feeds a signal to the Battery Management System.
510kΩ±3%
Operating temperature range: -40C to +85C
RoHS Compliance (Directive 2011/65/EU)
● Accelerometers
Mechanincally testing the battery pack.
Electrically isolated sensors
Wide frequency range
High sensitivty with low noise
This will close in 0 seconds
Electrification - Thermal Runaway
Thermal Runaway Applications
Occurs when battery cells exceed allowable operating temperature causing an explosion/fire, which then propagates, or spreads, to other cells within the battery pack.
● Temperature Sensors ● Pressure Sensors ● Gas Detection Sensors
● Temperature Sensors
Measure and monitor battery temperature to detect Thermal Runaway conditions.
Capable of single or multiple cell detection
● Pressure Sensors
Detect pressure change inside the battery cell that indicates Thermal Runaway conditions.
Surface mountable
Simple 3-command I2C interface
Very low current consumption: less than 35μA
● Gas Detection Sensors
Detect the out-gassing of Carbon Dioxide (CO2) to indicate pre-combustion conditions.
Single and dual channel configurations
Self-calibration with patented ABC LogicTM Software
● Gas Detection Sensors
Detect the presence of combustible gases that indicate Thermal Runaway conditions.
Sensitive to multiple gases: CO / H2 / NH3 / CO2
Temperature / Humidity sensor
Pressure sensor (20 up to 250 kPa)
Fast response time: less than 1 second
IP6K7 rating
This will close in 0 seconds
Electrification - Cell Connection System (CCS)
Cell Connection System (CCS) Applications
Used as top cover of the battery cell to provide connectivity with the Battery Management System (BMS).
● Temperature Sensors ● Current Sensors
Click on the logos to explore company sites.
● Temperature Sensors
Provide temperature and voltage sensing to monitor the state of charge of the battery cells.
High current circuit for battery cell connectivity
Available styles: Wire Harness and Flexible Printed Circuit (FPC)
● Current Sensors
Measure and monitor the state of charge of the battery cells.
Busbar, wire mounting, or integrated busbar
Analog ratiometric output
This will close in 0 seconds
Electrification - Power Inverter / E-Motor
Power Inverter / E-Motor Applications
Converts DC to AC electricity that is required to drive the traction motor.
● Temperature Sensors ● Inductive Position Sensors ● Current Sensors
● Temperature Sensors
Measure and monitor operating temperature of the power inverter to provide feedback on unsafe conditions.
Fast response time
Pigtail connector
● Inductive Position Sensors
Provide data on the angular position of the rotating motor shaft to optimize control of the motor inverter.
Compact and lightweight alternative to resolvers
Flexible integration in on-axis and off-axis configuration
Robust against magnetic flux and external stray fields
● Current Sensors
Measure and monitor current flowing to and from battery.
Hall effect, open loop current sensor
Busbar mounting, 1 phase and 3 phase housing
Analog ratiometric output
This will close in 0 seconds
Electrification - High Voltage Charger Connector
High Voltage Charger Connector Applications
Connects the high voltage source to charge the battery within the vehicle.
● Temperature Sensors
Click on the logos to explore company sites.
● Temperature Sensors
Detect over-temperature conditions during charging.
Installed within the connector
This will close in 0 seconds
Electrification - Motor Coil
Motor Coil Applications
Generates torque on the motor's shaft through the interaction of magnetic fields of the stator and rotor.
● Temperature Sensors
● Temperature Sensors
Measure and monitor temperature of the motor coil to provide feedback on the operating conditions of the electric motor.
Field-proven design
Variety of lead lengths, terminal and connector options
This will close in 0 seconds
Electrification - Battery Coolant
Battery Coolant Applications
Circulates around the battery cell to maintain optimum battery management and life.
● Temperature Sensors ● Pressure Sensors ●● Combined Pressure & Temperature Sensors ● Ultrasonic Level, Conductivity, and Concentration Sensors ● Coolant Breach/Water Intrusion Sensors
● Temperature Sensors
Measure and monitor fluid temperature of inlet/outlet battery coolant to provide indication of battery cell temperature.
No leak path – Sensor cavity and tube are one piece
USCAR sealed connection system
Various part geometries available
● Coolant Breach / Water Intrusion Sensors
Detect the presence of coolant / water in the battery pack.
Operates based on conductivity of the fluid being sensed
Easy to install
RoHS compliant
● Pressure Sensors
Measure the pressure in the cooling system to control pump capacity.
Internal metal sealing for high media compatibility and no leakage
Customized calibration for high accuracy
● Combined Pressure & Temperature Sensors
Measure pressure in the cooling system, while, at the same time, measure temperature of the coolant for optimum thermal management.
Available versions: R1234yf (up to 35bar) and R744 (up to 200bar)
Tested LIN 2.1 conformity
Automatic address assignment within LIN network
● Ultrasonic Level, Conductivity, Concentration, and Temperature Sensors
Continuously monitor fluid level for early detection of coolant leakage.
Level accuracy: ±2mm
Temperature accuracy: ±2.5°C
Output protocol offerings: Analog, PWM, SENT, CAN, LIN
Input voltage options: 5V / 12V / 48V
This will close in 0 seconds
Electrification - Fuel Cell
Fuel Cell Applications
Typically generates electricity by combining atmospheric oxygen and on-board compressed hydrogen.
● Temperature Sensors ● Pressure Sensors ● Gas Detection Sensors ● Level Sensors
Click on the logos to explore company sites.
● Temperature Sensors
Monitor temperature in various areas of a fuel cell vehicle to enable safety and efficiency throughout the system, e.g., Battery, Fuel Cell, Cooling System, Transmission and Converter.
Moisture proof construction
Fast repsonse time
High temperature monitoring
● Gas Detection Sensors
Measure the concentration of H2 and humidity.
Sensitive to H2 gases
Temperature / Humidity sensor
Fast response time: less than 1 second
IP6K7 rating
● Water Level Sensors
Ultrasonic Switch indicates water level in the steam / water separation tank.
Single point ultrasonic switch
Microprocessor controlled analog output (voltage)
All-plastic design (PPS) eliminates opportunity for metal ionization
● Pressure Sensors
Robust sensors for fuel-cell applications, specifically designed to withstand the harsh conditions in hydrogen environments.
High accuracy and performance
Wide pressure range
Custom options
This will close in 0 seconds
HVOR - Fuel Handling System
Fuel Handling System Applications
●●●● Fuel ● EVAP ● Diesel Flow Meter (DFM)
● Temperature Sensors
High accuracy
High stability
Integral/pigtail options
Combination sensor options
● Pressure Sensors
High accuracy
High performance
Long-term stability
Custom options
● Level Sensors
High accuracy
Continuous monitoring
Robust non-contacting sensors
Slosh and aeration filtering software
● Position Sensors
Absolute, non-contact measurement
Highest reliability
Robust and compact design for harsh environments
● Diesel Flow Meter
Fuel consumption measurement of diesel engine systems
Flow rates up to 4,000 liters per hour
Single and differential models
This will close in 0 seconds
HVOR - Cabin Comfort
Cabin Comfort Applications
● Discharge Air ● Steering Wheel ●● Seats ● Dewpoint ● Cabin Air Filter ● Particulate Detection ● Joystick Control ● Cabin Noise ● NVH ● Handle Throttle ● Toxic Gas Detection ● Cabin Suspension ● Passive Entry and Passive Start Systems ● Immobilizer
● Temperature Sensors
High accuracy
High stability
Noise immune NTC option
Moisture resistant
Fast response time
● Pressure Sensors
High accuracy
High performance
Customizable design
Multiple output options
● Gas Detection Sensors
Detectable gases: CO2, CO, NO2, NH3
PWM and LIN bus
Custom packaging options
● Dewpoint Sensors
PWM and LIN Bus
Custom package options
Combined temperature and humidity measurement
● Dust Particulate Sensors
PM2.5
Laser detection
Fast response
High accuracy
● Passive Entry and Passive Start Systems
Anti-theft
Long-range PEPS
Short-range immobilizer
Encrypted CAN Bus
CE/FCC certified
● Position Sensors
Non-contact inductive and hall-effect technologies
Excellent resolution and precision
Reliable in harsh environments
Touch-less mechanical solutions
● Position Sensors
Absolute, non-contact measurement
Highest reliability
Robust and compact design for harsh environments
● Acoustic Sensors
Specialized microphones for a wide variety of applications
High temperature, water and dust resistant models available
Highly accurate
● Accelerometers
Wide frequency ranges available
Single and triaxial configurations
Robust design for demanding environments
Various mounting methods
Electrically isolated
High sensitivity and low noise
This will close in 0 seconds
HVOR - HVAC
HVAC Applications
● Outside Air ●●● Refrigerant/Coolant ● Evaporator ● Air Quality ● Particulate Detection ● HVAC Actuator
Click on the logos to explore company sites.
● Temperature Sensors
High accuracy
High stability
Noise immune NTC option
Moisture resistant
Fast response time
● Position Sensors
Robust and reliable modular design
Custom form-factor available
Selectable working principle: Potentiometric, hall effect, reed switch
Compatible with exhaust gas media and acid condensates
● DEF Level, Temperature & Concentration Sensors
High accuracy
Continuous monitoring
Meets EPA regulations
Programmable for irregular shape tank
This will close in 0 seconds
HVOR - Motion Control & Driver Assistant Systems
Motion Control & Driver Assistant Systems Applications
● Boom Arm Position / Extension ● Bucket / Tool Position ● Tilt Cylinder Control ● Hitch Position ● Telehandler Position ● Suspension Control ● Outrigger Position ● Load Management ● Automated Electro-hydraulic Steering ● Smart Flex Modules / Gateways
● Position Sensors
Absolute, non-contact measurement
Highest reliability
Robust and compact design for harsh environments
● SmartFlex
Sensor gateway and data logger
This will close in 0 seconds
HVACR - Air Handling Unit
Air Handling Unit Applications
Energy Efficiency, Indoor Air Quality
● Temperature Sensors ● Gas Sensors (CO2, Refrigerant) ● Humidity Sensors ● Pressure Sensors ● Position Sensors ● Vibration Sensors
● Temperature Sensors
Robust design for harsh environments
Thermal cut-off fuses for added safety
Customizations available
● Gas Sensors (CO2)
Lifetime calibration
Outputs: I2C, UART, BACnet and analog
Combination models with CO2, humidity and temperature
● Gas Sensors (Refrigerant)
Detectable gases: R290, NH3, R454, R32, R1234
Outputs: Linearized and analog voltage
500/1000 ppm to 100% LEL
● Humidity Sensors
Transmitters and OEM sensors
Field replaceable sensors
High IP rating protection
● Pressure Sensors
Types: Absolute, vented gauge and sealed gauge
Stainless steel, robust for harsh environments
Pressure range: 3psi – 7500psi
● Ultra Low Pressure Sensors
Air flow: monitoring and control
Pressure ranges: 0.25inch H2O to 150psi
Outputs: analog and digital
● Position Sensors
Air mixing flap & motor position and speed sensing
Reliable non-contacing 360° position feedback in compact packaging
Through-hole design
High performance in harsh environmental conditions
● Vibration Sensors
Condition monitoring for fault detection of fans and motors
Custom designed transducers to fit any application
High bandwidth complex arrays
This will close in 0 seconds
Military - Space
Space Applications
● Temperature Sensors ● Pressure Sensors ● Force Sensors ● Microphones ● Shock Sensors ● Vibration Sensors ● Gas Detection Sensors ● Position Sensors
Click on the logos to explore company sites.
● Temperature Sensors
Application: Atomic clock
Long-term stability
Proven reliability
All definitions and test methods per MIL-PRF-23648
● Pressure Sensors
Application: Satellite propulsion
Robust and rugged
Long-term stability
High repeatability
High accuracy
● Vibration Sensors
Applications: Vibration and shock testing of spacecraft before launch and during flight
Hermetic and low outgassing accelerometers
Force limited vibration testing sensors
Shock accelerometers for explosive bolts and stage separation
● High Temperature Accelerometers
Application: Rocket motor testing
Continuous vibration measurement up to 760°C
● Cryogenic Accelerometers
Application: Cryogenic fuel system testing
Vibration measurement capability down to -269°C
● Pressure Sensors
Application: Combustion instability measurement
Dynamic pressure measurement capability down to -240°C for cryogenic fuel system testing
Dynamic pressure measurement capability up to 760°C for combustion instability measurement
● Microphones
Application: Acoustic stress testing of spacecraft before launch
From 16 dB to 174 db
● Position Sensors
Application: unfolding control
Rugged design
Reliable position feedback
● Gas Detection Sensors
Application: Fuel leakage
0 to 100% LEL
Approved EX-d
Mechanically robust
Application: detection of toxic gases
Detectable gases: VOCs, CO2, CO, NO2, NH3
Custom and robust packaging options
This will close in 0 seconds
UAV - Pre-Flight Testing
Pre-Flight Testing Applications
From the initial design phase of a new vehicle to just moments before takeoff, our sensors are used to validate the functionality and safety of the equipment.
Can be powered by direct aircraft DC voltage (no signal conditioner required)
Gas-damped, silicon MEMS sensing elements offer high frequency overload protection
Screw mount for permanent monitoring applications
This will close in 0 seconds
UAV - In-Flight
In-Flight Applications
Our sensors optimize the Flight Control Systems offering reliable and redundant monitoring from the battery to engine function to air speed, wing position, and altitude.
● Air Speed ● Pressure ● Wind Speed ● Altitude ● Temperature ● Tilt ● Humidity ● Vibration ● Position ● Current ● Hydrogen Detection ● Gas & Air Quality
● Single Axis Accelerometers
These accelerometers are used for Health and Usage Monitoring Systems (HUMS) to monitor vibration over the lifetime of the aircraft.
Industry standard ICP® (IEPE) power supply
Screw mount for monitoring applications
Electrically case isolated for high EMI environments
Integral cable to reduce weight
● Digital Barometric Pressure Sensor & Air Speed
AUAV Family - Dual pressure sensor combines both Barometric (Altitude) and Air Speed Sensing in a single PCB mountable package.
Wide array of PCB mountable Pressure Sensors for Digital or Analog interface
Available I2C or SPI Digital, Amplified Analog, or Basic mV outputs
Configurable to meet specific design requirements
Widely used in both commercial and military UAV applications
● Altitude
Family of pressure sensors for customized analog or digital high-performance measurement.
● Wind
Family of pressure sensors used to detect head wind, cross axis wind for flight stability control.
PCB mount package configurations
Analog, Digital I2C or SPI interface options
Digital Sensors available with unique addressing for diagnostic use
Available in Industrial Grade for rugged environments
Available with Parylene protective coating
● Barometric Pressure Sensor
Packaged in a QFN configuration, the NPB packaging contains the pressure sensing element and all necessary signal conditioning electronics. AEC-Q 100 Qualified with I2C and SPI interface.
Pressure Ranges: 260 to 1260mBar, 50 to 200kPa
4x4mm QFN Package
QFN package allows AVI to detect the solder joint
Ultra low current consumption in sleep mode
12C interface (SPI available upon request)
Operating range 1.7V to 3.6V
● Media Isolated Pressure Sensor
These sensors utilize stainless-steel media isolated technology, as well as backside absolute pressure technology to provide accurate and reliable measurements in harsh environments. The piezoresistive sensor chip is housed in a fluid-filled cylindrical cavity and isolated from measured media by a stainless-steel diaphragm and body.
Range from 0 to 15,000 PSI
Absolute, differential, and gauge
Analog and digital output
Available in ported and non-ported versions
Waterproof options
● Current Sensor
Current sensors generate a ratiometric analog output voltage signal proportional to the current flowing through the conductor and provide accurate measurement of AC and DC currents in battery management and motor control applications.
Based on Hall effect or TMR technology
Busbar or cable mounting
Measured current value from ±25A to +4000A
Non-intrusive technology
Galvanic separation between power and control
Operating temperature from -40°C to +125°C
● Tilt Sensor
The tilt sensors measure inclination, tilt and angle in harsh environmental conditions. With its ability to measure angles up to 360° with an accuracy of less than 0.5° over the full temperature range, it is perfect for providing flight control systems with data to maintain stability in horizontal flight.
Reliable and wear-free MEMS technology
Inclination range: ±25°, ±45°,+90°,±180°, and others tilt and acceleration ranges upon request
Digital signal processing, filter algorithms
Analog and CAN output
Dual axis combined gyroscope and accelerometer
Accuracy less than 0.5° (-40°C to 85°C)
Fully sealed (IP69K) for use in harsh environments
Operating temperature from -40°C to +85°C
● eMotor Position Sensor
Accurate feedback on the angular position, direction, and speed of the rotor shaft to optimize control of the motor inverter and drive the electric engines with the best possible efficiency.
Alternative to conventional resolvers
Rotor position sensor for high-speed motor commutation
High accuracy
Up to 600.000 rpm (if only 1PP)
Low power consumption
Possibility to have an ASIL qualified sensor (D)
Cost efficient and lightweight by design
No need of magnetic target
Stray field immune
Robustness to misalignments and environmental conditions (IP, vibration, dust, high temperature)
Flexible design (end of shaft, through shaft and arc)
● Resistive Angle Sensor
The N-15 series offers you endless rotation, 340° wide electrical angle, SMD or through-hole mount, an extended working temperature range of -40°C to +120°C and a whole series of customization possibilities making it the most flexible resistive sensor on the market. The N-15 is ideal for drone camera gimball angle position feedback
Long life
Excellent performance (3% linearity)
Up to 2.000.000 life cycles
IP54 protection
360° endless rotation
Low profile (4.4 mm) and footprint (15 mm)
High operating temperature range
● Thermal Runaway Sensor
Measurement of hydrogen gases released from lithium-ion battery packs. Hydrogen gases leaking from battery packs indicate battery failure.
Two options:
Surface mount sensor for mounting on the battery management module or independent device with BUS communications
Factory calibrated with automatic temperature compensation
● Hydrogen Gas Detection Sensors
To detect H2 leakages in fuel-cell operating drones or to detect off-gassing of H2 during Li-ion batteries Thermal Runaway event.
Compact H2 sensors with different output signals
Small size
● Air Quality Gas Detection
Detection of various Toxic gases in air. H2, CO, HF, NO2, VOC, 03, SO2.
Broad range of different gas sensors
Small size
Very low power consumption
Low weight
Temperature
● Type FL Sensor
Flexible temperature sensor for battery cell temperature measurement or other temperature measurement where a thin flexible sensor is needed
● Ring / Tab Terminal Sensor
Measures the surface temperature of what it is affixed to
● Motor Winding Temperature Sensor
Measures the motor windings of the motor to ensure an over temperature condition is not reached
● PTC Heaters
Prevents the lens of cameras from fogging over
● Interchangeable NTC Thermistors
Temperature measurement NTC theristor with high accuracy
This will close in 0 seconds
UAV - Application or Mission Specific Sensors
Application or Mission Specific Sensor Applications
increasing productivity, reducing risk, aiding in humanitarian efforts, or simply providing a consumer convenience, our sensors support the successful execution of the UAV's mission.
● Environmental hazards ● Temperature ● Payload ● Pressure ● Humidity ● Infrared ● Gas and Air Quality
Click on the logos to explore company sites.
● Infrared Sensors
Measures an object's temperature contactlessly.
● Barometric Pressure Sensors for Environmental Monitoring
Barometric sensors provide valuable data for altitude correction and atmospheric conditions. Monitoring and Detection of surrounding weather conditions can be an early warning system for remote users where predictive monitoring is crucial.
Available in standard 15 PSIA ranges or customize for specific range use
Intended for PCB mounting
Available in a wide variety of packages and pressure port styles to fit a UAV’s architecture
Available in fully calibrated Digital 12C, SPI Interface, Amplified or Basic mV output version
Digital Sensors available with unique addressing for redundant back up sensors or diagnostic use
● Humidity & Temperature
Fully-calibrated and temperature-compensated combined humidity and temperature sensor supplied in a water-resistant IP67 package, making it the most advanced and cost-effective sensing solution for virtually any type of harsh environment application.
Ready to use - Fully-calibrated and temperature-compensated
Water resistant - IP67 Certified
Digital Output or Pulse Density Modulated (PDM) Output converted to Analog
Available in multiple flexible cable lengths
Precise and accurate (±2% RH, ±0.5°C, 14 bit resolution)
Low current consumption
Reliable in harsh environments
Flexible mounting options
● Air Quality Gas Detection
Detection of various toxic gases in th air. H2, CO, HF, NO2, VOC, O3, SO2.
Broad range of different gas sensors, small size, very low power consumption, and low weight
This will close in 0 seconds
Hydrogen Technologies - Hydrogen Generation, Transportation, and Storage
Hydrogen Generation, Transportation, and Storage
● Temperature Sensors ● Vibration Sensors ● Pressure Sensors ● Ultra Low Pressure Sensors ● Gas Sensors (Including Hydrogen) ● Humidity Sensors ● Position Linear Sensors and Level Transmitters ● Level Sensors ● Level Measurement of Liquid Hydrogen
● Temperature Sensors
Robust design for harsh environments and tank applications
Thermal cut-off fuses allow for added safety features
Customization options
High accuracy and stability for increased efficiency and performance
● Vibration Sensors
Monitor equipment to ensure efficient operation
Early fault detection
Compact sensor placement
Real-time data feedback of live conditions
Meets environmental and hazardous area requirements
● Pressure Sensors
Media compatibility
Output repeatability
Robust design
High pressure versions for tank applications
Long-term stability
High accuracy
Compact package size
Stainless Steel for durability
● Ultra Low Pressure Sensors
Measure, monitor, and control air flow and air pressure
High stability and repeatability
High accuracy
Compact package size
● Gas Sensors (Including Hydrogen)
ATEX certified
Selective gas detection
High accuracy and range
Long life
Low power usage
● Humidity Sensors
Duct- and wall-mounted transmitters
Fully-calibrated OEM sensors
Connectivity to building automation systems
● Position Linear Sensors and Level Transmitters
Absolute, non-contact measurement
Highest reliability
Robust design for harsh environments
ATEX Certified
● Level Sensors
Ultrasonic
High accuracy
Multiple output options
Multiple distance options
Customizable options
This will close in 0 seconds
Hydrogen Technologies - Fuel Cell
Fuel Cell
●● Steam / Water Tank ● Hydrogen Supply ●● Hydrogen Tank ●●● Compressor ●● Fuel Cell Stack ●●● Humidifier ● Leak Detection
● Temperature Sensors
Monitor temperature in various areas of a fuel cell vehicle
Moisture proof construction
Fast Response time
Wide temperature range
High-pressure proof design available
● Gas Leak Detection Sensors
Sensitivity to H2 gases
Packaged Modules and Surface Mount versions
Fast response time: less than 1 second
IP6K7 rating. ASIL-A sensors, Thermal Conductivity sensor technology, 0-4% range
● Ultrasonic Fluid Level Switch
Simple analog (voltage) output
Extremely durable and accurate
Microprocessor controlled
All-plastic design (PPS) eliminates opportunity for metal ionization
● Pressure Sensors
MEMS, piezoresistive, oil-filled
Extremely durable and accurate
Configurable with multiple outputs, connectors, ports, etc.
Self-regulating properties - power will adjust to prevailing conditions with ~10x variation in output
Higher reliability than wire-wound products
Special shapes suit customer design
● Temperature Sensors
Precision temperature measurement of in-flight instrumentation and climate control.
Excellent long-term stability
High reliability
Multiple rugged configurations available
● Pressure Sensors
Used in instrumentation for airspeed indication and during flight test for aerodynamic measurements.
Low long-term drift
High stability and repeatability
● Ultra Low Pressure Sensors
Used in Pilot control modules for Wind Speed and Flight condition monitoring.
Calibrated to -40°C to 125°C
High stability and repeatability
Digital output: 14-bit or 18-bit
● Digital Barometric Pressure Sensor & Air Speed
Single and Dual pressure sensor designs. Dual eVTOL combines both Barometric (Altitude) and Air Speed Sensing in a single PCB mountable package.
Wide array of PCB mountable Pressure Sensors for Digital or Analog interface
Available I2C or SPI Digital, Amplified Analog or Basic mV outputs
Configurable to meet specific design requirements
Widely used in both Commerical and Military UAV applications
● Altitude
Family of Barometric pressure sensors for Altitude, Critical Height measurement, and Barometric weather monitoring, available in customized analog or digital high-performance measurement.
Wide array of PCB mountable Pressure Sensors for Digital or Analog interface
Available I2C or SPI Digital, Amplified Analog or Basic mV outputs
Configurable to meet specific design requirements
Widely used in both Commerical and Military UAV applications
● Wind
Family of pressure sensors used to detect head wind, cross-axis wind for flight stability control.
PCB mount package configurations
Analog, Digital I2C or SPI interface options
Digital Sensors available with unique addressing for diagnostic use
Available in Industrial Grade for rugged environments
Available with Parylene protective coating
● Barometric Pressure Sensor
Packaged in a QFN configuration, the NPB packaging contains the pressure sensing element and all necessary signal conditioning electronics. AEC-Q 100 Qualified with I2C and SPI interface.
Pressure Ranges: 260 to 1260mBar, 50 to 200kPa
4x4mm QFN Package
QFN package allows AVI to detect the solder joint
Ultra low current consumption in sleep mode
I2C interface (SPI available upon request)
Operating range 1.7V to 3.6V
● Tilt Sensor
The tilt sensors measure inclination, tilt, and angle in harsh environmental conditions. With its ability to measure angles up to 360° with an accuracy of less than 0.5° over the full temperature range, it is perfect for providing flight control systems with data to maintain stability in horizontal flight.
Reliable and wear-free MEMS technology
Inclination range: ±25°, ±45°, ±90°, ±180°, and others tilt and acceleration ranges upon request
Digital signal processing, filter algorithms
Analog and CAN output
Dual axis combined gyroscope and accelerometer
Accuracy less than 0.5° (-40°C to 85°C)
Fully sealed (IP69K) for use in harsh environments
Operating temperature from -40°C to +85°C
● Resistive Angle Sensor
The N-15 series offers you endless rotation, 340° wide electrical angle, SMD or through-hole mount, an extended working temperature range of -40°C to +120°C, and a whole series of customization possibilities, making it the most flexible resistive sensor on the market. The N-15 is ideal for camera gimbal angle position feedback.
Long life
Excellent performance (3% linearity)
Up to 2.000.000 life cycles
IP54 protection
360° endless rotation
Low profile (4.4 mm) and footprint (15 mm)
High operating temperature range
This will close in 0 seconds
eVTOL - E-Motor / Powertrain
E-Motor / Powertrain
● Accelerometers ● Media Isolated Pressure Sensor ● Current Sensor ● eMotor Position Sensor ● Temperature Sensors ● Air Quality Gas Detection
● Accelerometers
These accelerometers are integrated into the aircraft's Health and Usage Monitoring System (HUMS) to continuously monitor vibration of critical drivetrain components over the lifetime of the aircraft.
Early fault detection
Industry standard ICP® (IEPE) power supply
Screw mount for monitoring applications
Electrically case isolated for high EMI environments
Integral cable to reduce weight
Suitable for temperatures from (See 339 series)
● Media Isolated Pressure Sensor
These sensors utilize stainless-steel media isolated technology, as well as backside absolute pressure technology to provide accurate and reliable measurements in harsh environments. The piezoresistive sensor chip is housed in a fluid-filled cylindrical cavity and isolated from measured media by a stainless-steel diaphragm and body.
Range from 0 to 15,000 PSI
Absolute, differential, and gauge
Analog and digital output
Available in ported and non-ported versions
Waterproof options
● Current Sensor
Current sensors generate a ratiometric analog output voltage signal proportional to the current flowing through the conductor and provide accurate measurement of AC and DC currents in battery management and motor control applications.
Based on Hall effect or TMR technology
Busbar or cable mounting
Measured current value from ±25A to ±4000A
Non-intrusive technology
Galvanic separation between power and control
Operating temperature from -40°C to +125°C
● eMotor Position Sensor
Accurate feedback on the angular position, direction, and speed of the rotor shaft to optimize control of the motor inverter and drive the electric engines with the best possible efficiency.
Alternative to conventional resolvers
Rotor position sensor for high-speed motor commutation
High accuracy
Up to 600.000 rpm (if only 1PP)
Low power consumption
Possibility of having an ASIL-qualified sensor (D)
Cost-efficient and lightweight by design
No need of magnetic target
Stray field immune
Robustness to misalignments and environmental conditions (IP, vibration, dust, high temperature)
Flexible design (end of shaft, through shaft and arc)
● Temperature Sensors
NTC thermistor that measures the temperature of the copper windings.
High accuracy
Long-term stability
Rugged design for maximum protection
● Air Quality Gas Detection
Detection of various Toxic gases in air. H2, CO, HF, NO2, VOC, O3, SO2.
Broad range of different gas sensors, small size, very low power consumption and low weight
This will close in 0 seconds
eVTOL - In-Cabin
In-Cabin
● Temperature Sensors ● Air Quality Gas Detection ● Position Sensors
● Temperature Sensors
In-flight temperature control for service items.
High accuracy
Long-term stability
Rugged design for maximum protection and direct immersion in liquids or gases
● Air Quality Gas Detection
Detection of various Toxic gases in air. H2, CO, HF, NO2, VOC, O3, SO2.
Broad range of different gas sensors, small size, very low power consumption and low weight
● Position Sensor
Detects when seatbelt is latched and provides alert to enforce mandatory usage during takeoff and landing.
Sealed for harsh environments
Selectable working principle: Hall effect/reed switch
Robust and reliable modular design
● Position Sensor
Detects position of overhead storage door and provides alert when door is not fully closed to prevent it from opening during flight.
Miniature switch or position sensor
Digital output
Surface mount device (SMD) version
This will close in 0 seconds
eVTOL - HVAC
HVAC
● Temperature Sensors ● Position Sensors ● Pressure Sensors ● Gas Detection Sensors ● Dust Particulate Sensors ● Combined Pressure & Temperature Sensors
● Temperature Sensors
Provides in-flight temperature control for cabin comfort and service items.
High accuracy
High stability
Noise-immune NTC option
Moisture resistant
Fast response time
● Position Sensors
Long life
Low hysteresis
Excellent resolution and linearity
Field-proven
Custom connectors and wires
● Pressure Sensors
Leakproof
High accuracy
Harsh Media compatibility
● Gas Detection Sensors
Detectable gases: CO2, CO, NO2, NH3
PWM and LIN bus
Custom packaging options
● Dust Particulate Sensors
PM2.5
Laser detection
Fast response
High accuracy
● Pressure Sensors
Designed for conventional Air-conditioning Systems. Different output signals available.
Leakproof
High accuracy
Harsh Media compatibility
● Combined Pressure & Temperature Sensors
Versions for R1234yf and also for CO2 Heat Pump Systems with R744.
Leakproof
High accuracy for optimum system efficiency
Wide pressure range: 10 bar to 200 bar
LIN output
Diagnostic and protective features
This will close in 0 seconds
eVTOL - Battery Pack
Battery Pack
● Temperature Sensors ● Cell Connection System (CCS) ● Water Detection Sensors ● Current Sensor ● Hydrogen Gas Detection Sensors ● Blast Pressure Sensors
● Temperature Sensors
Measure and monitor surface temperature of the many cells within the battery pack, which is critical to preserving the chemistry of the battery.
Single point temperature sensors
Rigid and flexible types
Custom sensor packaging
● Cell Connection System (CCS)
Monitors the battery cover for temperature at key points.
High current circuit for battery cell connectivity
Available styles: Wire Harness and Flexible Printed Circuit (FPC)
● Water Detection Sensors
Detects moisture leakage and feeds a signal to the Battery Management System.
510k ±3%
Operating temperature range: -40°C to +85°C
RoHS Compliance (Directive 2011/65/EU)
● Current Sensor
Current sensors generate a ratiometric analog output voltage signal proportional to the current flowing through the conductor and provide accurate measurement of AC and DC currents in battery management and motor control applications.
Based on Hall effect or TMR technology
Busbar or cable mounting
Measured current value from ±25A to ±4000A
Non-intrusive technology
Galvanic separation between power and control
Operating temperature from -40°C to +125°C
● Hydrogen Gas Detection Sensors
Measurement of hydrogen gases released from lithium-ion battery packs. Hydrogen gases leaking from battery packs indicate battery failure.
Two options:
Surface mount sensor for mounting on the battery management module or independent device with BUS communications
Factory calibrated with automatic temperature compensation
● Hydrogen Gas Detection Sensors
To detect off-gassing of H2 during Li-ion batteries Thermal Runaway event or to detect H2 leakages in fuel-cell operating eVTOL
Compact H2 sensors with different output signals
Small size
● Blast Pressure Sensors
The sensors are used in pre-flight battery testing; to capture battery explosion during drop and thermal run away.
Pressure sensors with quartz sensing elements
For shock wave, blast, and explosive or detonation in closed chambers
High-frequency response
This will close in 0 seconds
eVTOL - Battery Coolant
Battery Coolant
● Temperature Sensors ● Coolant Breach / Water Intrusion Sensors ● Pressure Sensors ● Combined Pressure & Temperature Sensors ● Ultrasonic Level, Conductivity, Concentration, and Temperature Sensors
● Temperature Sensors
Outlet battery coolant to provide indication of battery cell temperature.
No leak path - Sensor cavity and tube are one piece
USCAR sealed connection system
Various part geometries available
● Coolant Breach / Water Intrusion Sensors
Detect the presence of coolant / water in the battery pack.
Operates based on conductivity of the fluid being sensed
Easy to install
RoHS compliant
● Pressure Sensors
Measure the pressure in the cooling system to control pump capacity.
Internal metal sealing for media compatibility and no leakage
Customized calibration for high accuracy
● Combined Pressure & Temperature Sensors
Measure pressure in the cooling system, while, at the same time, measure temperature of the coolant for optimum thermal management.
Available versions: R1234yf (up to 35 bar) and R744 (up to 200 bar)
Tested LIN 2.1 conformity
Automatic address assignment within LIN network
● Ultrasonic Level, Conductivity, Concentration, and Temperature Sensors
Continuously monitor fluid level for early detection of coolant leakage.
Level accuracy: ±2mm
Temperature accuracy: ±2.5°C
Output protocol offerings: Analog, PWM, SENT, CAN, LIN
Input voltage options: 5V / 12V / 48V
This will close in 0 seconds
eVTOL - Fuel Cell
Fuel Cell
● Temperature Sensors ● Gas Leak Detection Sensors ● Ultrasonic Level, Conductivity, Concentration, and Temperature Sensors ● Pressure Sensors ● Pressure + Temperature ● Gas Sensor
● Temperature Sensors
Monitors the temperature at key locations of the fuel cell.
Monitor temperature in various areas of a fuel cell VTOL
Moisture-proof construction
Fast Response time
Wide temperature range
● Gas Leak Detection Sensors
Sensitivity to H2 gases
Packaged Modules and Surface Mount versions
Fast response time: less than 1 second
IP6K7 rating
ASIL-A sensors, Thermal Conductivity sensor technology, 0-4% range
● Ultrasonic Fluid Level Switch
Monitor water level in the steam / water separation tank.
Simple analog (voltage) output
Extremely durable and accurate
Microprocessor controlled
All-plastic design (PPS) eliminates opportunity for metal ionization
● Pressure Sensors
Hydrogen tank pressure, coolant systems.
MEMS, piezoresistive, oil-filled
Extremely durable and accurate
Configurable with multiple outputs, connectors, ports, etc.
High accuracy and performance
Wide pressure range
Customization for specific applications
ASIL rating possible
● Pressure + Temperature
Hydrogen inlet, hydrogen outlet.
All plastic housings, bolt-on designs
Willing to customize for specific applications
High accuracy and performance
Wide pressure range
Custom options
● Gas Sensor
Hydrogen Sensor
Surface mount
Analog Output
Pre-calibrated
Automotive qualified
0-160000 ppm range
● Pressure Sensor
Cryogenic pressure sensors for hydrogen pump performance measurements.
Dynamic response with high-frequency response
High resolution, with microsecond rise time
Up to 10,000 psi (6.89 kPa) full-scale measurement range
Operating temperature down to -400°F (-240°C)
This will close in 0 seconds
eVTOL - Hydrogen Internal Combustion Engine
Hydrogen Internal Combustion Engine
● Pressure Sensors ● DEF / AdBlue Level and Concentration Sensors ● Temperature Sensors
● Pressure Sensors
Monitor DEF pump module pressure.
Patented Freeze-proof designed pressure sensors for urea pump applications
● DEF / AdBlue Level and Concentration Sensors
Monitor DEF level and concentration.
Monitor temperature in various areas of a H2ICE VTOL
Moisture proof construction
Fast Response time
High-temperature monitoring
Ultrasonic technology
Extremely durable and accurate
Offer both standalone sensors and sensors with heater modules
● Temperature Sensors
Monitors the temperature at key locations of the H2ICE VTOL.
Monitor temperature in various areas of a H2ICE VTOL
Piezoelectric pressure sensors for dynamic measurements
Continuous operation up to +1,400°F (760°C) with no cooling
Stable performance over fluctuating temperatures
Operating temperature down to -400°F (-240°C)
This will close in 0 seconds
Automotive - Chassis
Chassis Applications
● TPMS (Tire Pressure Monitoring System)
● TPMS (Tire Pressure Monitoring System)
High accuracy
24/7 operation
CAN Bus integration
Low power consumption: 7 years battery life
Pressure range: up to 14 bar
Autolocation feature
This will close in 0 seconds
HVOR - Chassis
Chassis
● TPMS (Tire Pressure Monitoring System)
● TPMS (Tire Pressure Monitoring System)
High accuracy
24/7 operation
CAN Bus integration
Low power consumption: 7 years battery life
Pressure range: up to 14 bar
Autolocation feature
This will close in 0 seconds
Marine - Commercial Fishing
Commercial Fishing Applications
● Hydrophones ● M3-5-6 Receiver ● SDS Processor ● SCALA System ● Spread Sensors ● Trawl Explorer ● TE/TS Sensor ● Catch, Bottom Contact Sensor ● Depth ● Pitch & Roll ● Battery ● Position ● Height in Door Sensor w/ Trawl Explorer Option ● Height in Net Sensors w/ Trawl Explorer ● Height in Seiners w/ Trawl Explorer Option ● Temperature ● Diesel Flow Meter
● Hydrophones
Allow the reception of signals emitted by sensors placed in the network.
Models vary in bandwidth, directly influencing the amount of data they can receive and certain characteristics such as position.
● M3-5-6 Receiver
Responsible for receiving signals from sensors and transforming them for the sds equipment processor to interpret.
There are several versions (m3-m5-m6) with differences in the amount of data they can receive and the number of hydrophones they can connect to.
● SDS Processor
Processes information received by receivers m3-5-6 and sends it to the macmini computer for presentation in the scala software.
● SCALA System
Scala is Marport's advanced trawl monitoring system that collects, processes, stores and displays data sent from multiple sensors, sounders and other connected devices. It gives the user full control over its fishing operations.
● Spread Sensors
Provides real-time information on the horizontal opening of doors or wings.
This information helps skippers understand how doors and the network work, avoiding risks such as entanglements and detecting possible breaks or network filling.
● Trawl Explorer
Provides information on the vertical opening of the network through an echogram.
It offers data on opening and depth, the amount of fish entering the network, network operation, species, etc.
This can be also an option incuded in other sensors like catch explorer.
● Trawl Explorer
Provides information on the vertical opening of the network through an echogram.
It offers data on opening and depth, the amount of fish entering the network, network operation, species, etc.
This can be also an option incuded in other sensors like catch explorer.
● TE/TS Sensor
Combines information from the trawl explorer sensor, providing speed and symmetry.
This data allows knowing the actual speed of the network and adjusting the boat's speed for proper operation.
● Catch, Bottom Contact Sensor
Indicates the amount of capture in the net and detects breaks or contact with the bottom (depending on where you installed it) this sensor can also feature many options.
● Catch, Bottom Contact Sensor
Indicates the amount of capture in the net and detects breaks or contact with the bottom. (depending on where you installed it) this sensor can also feature many options.
● Depth
Allows knowing the real position of the sensor with respect to the surface, providing information on the variation in the speed of the arts' fall.
● Pitch & Roll
Allows knowing the real movement of the sensor, providing information on the work of doors and the network.
● Battery
Informs about the battery level in the sensors, optimizing work and charging times, avoiding the placement of sensors with inadequate levels.
● Position
Provides the position of door and network sensors with respect to the boat, crucial to avoiding dangerous work areas.
● Height in Door Sensor w/ Trawl Explorer Option
Allows knowing the distance to the bottom of the doors, avoiding unwanted contacts.
● Height in Net Sensors w/ Trawl Explorer
Informs about the distance to the bottom of the network, minimizing risks of breaks and escape of catches.
● Height in Seiners w/ Trawl Explorer Option
Provides the distance to the bottom of the net, miminizing the risks of the botom contact of the net, and escape of catches.
● Temperature
Provides the water temperature at the sensor's location, facilitating the interpretation of fishing conditions.
This will close in 0 seconds
Marine - Sport Fishing & Recreational Marine
Sport Fishing & Recreational Marine Applications
● Diverse Selection of Chirp-Ready Ultrasonic Transducers Designed to Fit Various Vessel Types and Sizes ● Precision Navigating Speed Sensors ●● Spread Sensors ● Top Tier Temperature Sensors ● Best-in-Industry Depth Sensors ● Award-Winning SmartBoat® Modules / Data Loggers ● WeatherStations® - Range of Ultrasonic Weather Instruments ● Diesel Flow Meter
● Diverse Selection of Chirp-Ready Ultrasonic Transducers Designed to Fit Various Vessel Types and Sizes
Thru-hull, in-hull, transom mount, pocket/cavity mount models.
Unparalleled depth and water temperature performance.
Frequency bands boasting over 70 kHz of bandwidth.
Ultimate target and range resolution, ensuring accurate depth tracking and comprehensive coverage under your boat.
● Precision Speed Sensors
Paddlewheel, ultrasonic, and electromagnetic models
Industry-leading paddlewheel start-up speed-through-water data below 0.3 knots and linear speed performance at 0.6 knots.
Accurate performance from start up through speeds of up to 45 knots.
● Top Tier Temperature Sensors
Integrated in almost all ultrasonic sensors for measuring water temperature or air temperature.
● Best-in-Industry Depth Sensors
High accuracy, providing precise depth readings even in challenging conditions.
Some come equipped with chirp technology, which enhances target and range resolution, providing Conventional (CW) or chirp technology, which enhances target and range resolution, providing detailed information about what's in the water column and bottom detail
● Award-Winning SmartBoat® Modules / Data Loggers
Universal NMEA 2000 device with browser based SMARTFLEX™ software that makes setup and customization easy.
All data accessible on vessel's MFD.
Only solution with:
NMEA 2000, nmea 0183, j1939, and j1587 support
Fully customizable sensor-based alertsappear on MFD or via cloud notification
Available with ethernet bridging today, supporting NMEA and onenet
Advanced logging features with option to "replay" saved logs
● WeatherStations® - Range of Ultrasonic Weather Instruments
Comprehensive weather data for marine mobile or stationary installation
Sensors for apparent & dynamic true wind speed & direction, barometric pressure, relative humidity, air, temperature, gps position, speed over ground, course over ground.
IPX7 rating, weather stations compatible with various communication protocols
● Position Sensors ● Current Sensors ● Gear Tooth Speed Sensors ● Temperature Sensors ● Thermistors ● Pressure Sensors ● Tank Level ● Linear Position Sensors ● Diesel Flow Meter
● Position Sensors
Ready for outboard steering, throttle, fin and stabilizers angle feedback
Through-shaft, end-of-shaft 2-piece and arc/off-axis configurations
Non-contact inductive and hall-effect technologies
Accurate absolute output at high speeds (rotor position)
Reliable in harsh environments
● Current Sensors
For e-boat battery management systems
Based on open-loop hall-effect or coreless TMR technology
Busbar, integrated busbar, flanged or wire mount
Simple or redundant analog ratiometric output
Measured values of up to ±4,000a
● Gear Tooth Speed Sensors
Fast and near zero speed sensing capable
Compact and rugged for marine applications
Resistant to humidity and high vibrations
Esd protection
Custom cable or connector interface
● Temperature Sensors
Temperature probes
General fluid temperature
Oil temperature
Stainless steel sensor for outboard engine applications
Exhaust gas recycle temperature (egr), Cylinder head (cht)
Precision pressure measurement in airflow, airspeed, altitude and barometric pressure, and pressurized cabin control
● Pressure Sensors
Surface mount pressure sensors
● Level Sensors
Fuel tanks, grey water, black water, fresh water
● Linear Position Sensors
Magnetostrictive non-contact rugged sensors for steering and trim tab control availablie in multiple mounting styles and signal outputs.
This will close in 0 seconds
This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device. View e-Privacy Directive Documents | View GDPR Documents
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.
Cookie
Duration
Description
cookielawinfo-checbox-analytics
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checbox-functional
11 months
The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checbox-others
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-necessary
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-performance
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy
11 months
The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.
Advertisement cookies are used to provide visitors with relevant ads and marketing campaigns. These cookies track visitors across websites and collect information to provide customized ads.